View G150XG01V0_9113404.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 1/28 au optronics corporation product specifications 15.0? xga color tft-lcd module model name: g150xg01 v.0 approved by prepared by martin sun yen chuang au optronics croporation customer checked & approved by all version: 2.0 total pages: 28 date: august 16, 2004
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 2/28 product specification 15.0? xga color tft-lcd module model name: g150xg01 v.0 final specifications version: 2.0 total pages: 28 date: august 16, 2004
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 3/28 i contents 1.0 handling precautions p. 6 2.0 general description p. 7 2.1 display characteristics 2.2 functional block diagram 3.0 absolute maximum ratings p. 12 4.0 optical characteristics p. 13 4.1 signal for lamp connector 4.2 parameter guideline for ccfl inverter 5.0 signal interface p. 14 5.1 module interface connectors 5.2 module connector pin configuration 5.3 backlight connectors 5.4 backlight connector pin configuration 5.5 signal electrical characteristics 5.6 interface timing characteristics 5.7 interface timing definition 6.0 pixel format image p. 19 7.0 power consumption p. 20 8.0 power on/off sequence p. 20 9.0 backlight characteristics p. 21 9.1 signal for lamp connector 9.2 parameter guideline for ccfl inverter 10.0 vibration, shock, and drop p. 22 10.1 vibration & shock 10.1.1 vibration test spec 10.1.2 shock test spec 10.2 drop 11.0 environment p. 23 11.1 temperature and humidity 11.1.1 operating conditions 11.1.2 shipping conditions 11.2 atmospheric pressure 11.3 thermal shock
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 4/28 12.0 reliability p. 24 12.1 failure criteria 12.2 failure rate 12.2.1 usage 12.2.2 components de-rating 12.3 ccfl life 12.4 on/off cycle 13.0 safety p. 25 13.1 sharp edge requirement 13.2 material 13.2.1 toxicity 13.2.2 flammability 13.3 capacitors 13.4 hazardous voltage 14.0 other requirements p. 25 14.1 smoke free design 14.2 national test lab requirement 15.0 label p. 25 16.0 mechanical characteristics p. 26
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 5/28 ii record of revision version and date page old description new d escription remark 1.0 feb. 6, 2004 all n/a first edition for customers 2.0 aug.16, 2004 8 anti-glare, hard coating (3h) anti-glare, hard coating (3h), low reflection surface treatment 3.0 aug.16, 2004 13 min. 320 nits min. 300 nits white luminance @ ccfl 6.5ma 4.0 aug.16, 2004 21 lamp life: 50,000 hrs (typ.) ambient temp 20 j ~35 j (with no wind)
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 6/28 1.0 handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the cfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an enclosure (lcd monitor housing, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammability grade is used in the lcd module. the lcd module should be supplied by power complied with requirem ents of limited power source (2.11, iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the cfl in it is supplied by limited current circuit (2.4, iec60950 or ul1950). do not connect the cfl in hazardous voltage circuit.
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 7/28 2.0 general description this specification applies to the 15.0 inch color tft-lcd module g150xg01. the display supports the xga (1024(h) x 768(v)) screen format and 262,144 colors (rgb 6-bits data). all input signals are 1 channel lvds interface compatible. this module does not contain an inverter card for backlight. features -xga 1024(h) x 768(v) resolution - 50,000 hours lamp life -2 ccfls (cold cathode fluorescent lamp) -high contrast ratio, high aperture ratio -wide viewing angle -high-speed response -low power consumption application industrial applications
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 8/28 2.1 display characteristics the following items are characteristics summary on the table under 25 j condition: items unit specifications screen diagonal [mm] 381 (15?) outline dimension [mm] 326.5 (typ.) x 253.5 (typ.) x 12.0 (max.) display area [mm] 304.128 (h) x 228.096(38.1cm diagonal) resolution 1024(r,g,b x 3) x 768 pixel pitch [mm] 0.297 x 0.297 pixel arrangement r.g.b. vertical stripe display mode tn mode, normally white typical white luminance. [cd/m 2 ] 350nit (typ.) @ 6.5ma (note 1) brightness uniformity 80% (typ.) (note 2) luminance uniformity 1.7 (max.) (note 3) crosstalk (at 60hz) 1.2% (max.) (note 4) contrast ratio 400 : 1 (typ.) support colors 262,144 colors (6-bit for r,g,b) chromaticity(cie1931) white-x 0.313 white-y 0.329 color gamut 60% (typ.), of ntsc coverage viewing angle 60(left), 60(right), 40(up), 60(down) cr=10 response time [msec] 16ms (typ.) (tr +tf) nominal input voltage vdd [volt] +3.3 v power consumption (vdd line + ccfl line) [watt] 11.5 w (typ.) @6.5ma (all black pattern) electrical interface lvds (1 ch) frame rate [hz] 60hz (typ.), 75hz (max.) weight [grams] 1100 (typ.) mounting method side mounting surface treatment anti-glare, hard coating (3h), low reflection temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 note 1: brightness is measured at the center point of brightness value with all pixels displaying white. 256 512 192 384 576 unit: pixels 1 3 5 2 4 768
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 9/28 note 2: brightness uniformity of these 9 points is defined as below: (min. brightness / max. brightness) x 100% note 3: tco ?99 certification requirements and test me thods for environmental labeling of display report no. 2 defines luminance uniformity as below: ((lmax,+30deg. / lmin,+30deg.) + (lmax,-30deg. / lmin,-30deg.)) / 2 tco 99 certification requirements and test methods: 1) diagrammatic ?g effective area ?g wh 50 % 90 % 90 % 50 % 10 % unit: percentage of dimension of display area 10 % m d l max ?a +30 x and l min ?a +30 x
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 10/29 2) d is the diagonal of the screen in centimeters. and m d is as follow. m d (cm)=d1.5 with a minimum distance ?g m d =50 cm 3) the measurement positions shall consist of an active white square of size 4 by 4 cm. 4) measure lmax ?a +30 x and lmin ?a +30 x that are given as points l & r. and then rotated to an azimuth angle of ?30 degrees and measure l max ?a -30 x and l min ?a -30 x again using the same procedure. 5) the variation in luminance ratio is calculated as the ratio: l r =(( l max ?a +30 x / l min ?a +30 x ) ?? (l max ?a -30 x / l min ?a -30 x ))/2 ?? 1.7 note 4: unit: percentage of dimension of display area l l a -l a? l / l a x 100%= 1.2% max., l a and l b are brightness at location a and b l l b -l b? l / l b x 100%= 1.2% max., l a? and l b? are brightness at location a? and b? 1/2 1/2 1/6 1/6 a b 1 / 2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a ? b? 32 gray level 32 gray level 0 gray level
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 11/28 2.2 functional block diagram the following diagram shows the functional block of 15.0 inches color tft-lcd module: df-14h-20p-1.25h (hirose) jst bhr-03vs-1 cwy20g-a0d1t (ptwo) connector dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1024*(3)*768 pixels x-driver ic y - driver ic g1 g768 d1 d3072 inverter dc power 2 ccfl au asic rsds transmitter + 3.3 v lvds
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 12/28 3.0 absolute maximum ratings absolute maximum ratings of the module is as following: item symbol min max unit conditions logic/lcd drive voltage vdd -0.3 +3.6 [volt] input voltage of signal vin -0.3 +3.6 [volt] ccfl current icfl 2.5 8.5 [ma] rms note 1 operating temperature top 0 +50 [ o c] note 2 operating humidity hop 20 85 [%rh] note 2 storage temperature tst -20 +60 [ o c] note 2 storage humidity hst 5 95 [%rh] note 2 vibration - 1.5 / 10-200 [g / hz] shock - 50/20 [g / ms] half sine wave note 1: ccfl life time will drop dramatically if exceeding 6.5 ma; it will have safety concern if exceeding 8.5 ma. note 2: maximum wet-bulb should be 39 j and no condensation. wet bulb temperature chart relative humidity % tem p erature o c -20 0 60 50 95 5 100 0 operation range storage range storage range 90 80 70 60 50 40 30 20 10 t wb =39 j t=40 j ,h=95% t=60 j ,h=39% t=65 j ,h=29% t=50 j ,h=55%
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 13/28 4.0 optical characteristics the optical characteristics are measured under stable conditions at 25 j (room temperature): item unit conditions min. typ. max. viewing angle [degree] horizontal (right) cr = 10 (left) (right) cr =5 (left) 50 50 60 60 60 60 75 75 - [degree] vertical (upper) cr = 10 (lower) (upper) cr = 5 (lower) 30 50 45 65 40 60 50 75 - contrast ratio normal direction 300 400 - response time( note 1) [msec] raising time ton ( 10%-90% ) - 4 6 [msec] falling time toff ( 90%-10% ) - 12 17 [msec] raising + falling - 16 23 color / chromaticity red x 0.587 0.617 0.647 coordinates (cie) red y 0.317 0.347 0.377 green x 0.260 0.290 0.320 green y 0.563 0.593 0.623 blue x 0.118 0.148 0.178 blue y 0.070 0.100 0.130 color coordinates (cie) white white x 0.283 0.313 0.343 white y 0.299 0.329 0.359 brightness uniformity [%] 75 80 - white luminance @ ccfl 6.5ma [cd/m 2 ] 300 350 - crosstalk ( in 60hz) [%] - - 1.2 note 1: definition of response time: the output signals of photodetector are measured when the input signals are changed from ? black? to ? white? (falling time), and from ?white? to ? black? (rising time), respectively. the response time interval between the 10% and 90% of amplitudes. refer to figure as below. 100 90 10 0 % optical response black white black tr f tr r 100 90 10 0 % optical response black white black tr f tr r
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 14/28 5.0 signal interface 5.1 module interface connectors physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components connector name interface connector manufacturer hirose, ptwo or compatible type / part number df-14h-20p-1.25h (hirose) cwy20g- a 0d1t ( ptwo ) 5.2 module connector pin configuration df-14h-20p-1.25h (hirose) or cwy20g-a0d1t (ptwo) pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 vss ground 4 vss ground 5 rin0- - lvds differential data input (r0-r5, g0) 6 rin0+ + lvds differential data input (r0-r5, g0) 7 vss ground 8 rin1- - lvds differential data input (g1-g5, b0-b1) 9 rin1+ + lvds differential data input (g1-g5, b0-b1) 10 vss ground 11 rin2- - lvds differential data input (b2-b5, hs, vs, de) 12 rin2+ + lvds differential data input (b2-b5, hs, vs, de) 13 vss ground 14 clkin- - lvds differential clock input 15 clkin+ + lvds differential clock input 16 vss ground 17 rin3- nc 18 rin3+ nc 19 vss ground 20 nc please *floating* and don?t connect to ground.
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 15/28 5.3 backlight connectors connector name / designation for lamp connector manufacturer jst or compatible type / part number bhr-03vs-1 mating type / part number sm02(8.0)b-bhs-1-tb 5.4 backlight connector pin configuration pin symbol description 1 hv lamp high voltage 2 nc no connection 3 lv ground cable length: 140 +- 5 mm connector-output position: right side (front view) lamp assembly design shall be easy for replacement and repair. 5.5 signal electrical characteristics each signal characteristics are as follows; item symbol min typ max unit lcd drive voltage vdd +3.0 +3.3 +3.6 [v] ?high? input signal voltage vih 2.0 - - [v] ?low? input signal voltage vil - - 0.8 [v]
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 16/28 6-bits input data format note: r/g/b data 5: ms b, r/g/b data 0: lsb input signals shall be low or hi-z state when vin is off it is recommended to refer to the specifications of sn75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows: parameter condition min max unit vth differential inputhigh voltage(vcm=+1.2v) - +100 [mv] vtl differential input low voltage(vcm=+1.2v) -100 - [mv] vdiff=0v de vs hs b5 b4 b3 b2 b1 b0 g5 g4 g3 g2 g1 g0 r5 r4 r3 r2 r1 r0 previous data for current clk cycle next clkln r0in0 r1in1 r2in2
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 17/28 5.6 interface timi ng characteristics basically, interface timings described here is not act ual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. signal parameter symbol min typ max unit clock timing clock frequency clk 50 65 81 mhz horizontal active thd 1024 1024 1024 tclk horizontal blanking thbl 30 320 1024 tclk hsync timing horizontal period th 1054 1344 2048 tck vertical active tvd 768 768 768 th vertical blanking tvbl 8 38 256 th vsync timing vertical period tv 776 806 1024 th note: typical value refer to vesa standard
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 18/28 5.7 interface ti ming defi nition
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 19/28 6.0 pixel format image following figure shows the relationship of the input signals and lcd pixel format.
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 20/28 7.0 power consumption input power specifications are as follows; symbol parameter min typ max unit condition vdd lcd drive voltage 3.0 3.3 3.6 [v] idd lcd drive current - 1.0 1.3 [a] vdd=3.3v, all black pattern pdd lcd drive power consumption - 3.3 4.3 [watt] vdd=3.3v, all black pattern vddns allowable lcd drive ripple noise - - 100 [mv] p-p 8.0 power on/off sequence vin and lamp power on/off sequence are as follows. the timing of interface signal are shown in the table below. values symbol min typ max unit t1 0.5 - 10 [ms] t2 0.5 25 50 [ms] t3 200 - - [ms] t4 200 - - [ms] t5 0.5 16 50 [ms] t6 0.5 - 10 [ms] t7 1000 - - [ms] 90% 90% 10% 10% t1 t2 t5 t6 t7 t3 t4 0v lam p si g nal vin 10% 0v 0v
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 21/28 9.0 backlight characteristics 9.1 signal for lamp connector pin # signal name 1 lamp high voltage 2 no connection 3 ground 9.2 parameter guide line for ccfl inverter symble parameter min typ max units condition ircfl ccfl operation range 2.5 6.5 8.5 [ma] rms (ta=25 j ) note 4 icfl ccfl inrush current - - 20 [ma] fcfl ccfl frequency 40 55 80 [khz] (ta=25 j ) note 1 vicfl (25 j ) (reference) ccfl ignition voltage 1100 - - [volt] rms (ta=25 j ) note 3 vicfl (0 j ) (reference) ccfl ignition voltage 1450 - - [volt] rms (ta=0 j ) note 3 vcfl ccfl discharge voltage - 645 (@6.5ma) 710 (@2.5ma) [volt] rms (ta=25 j ) note 2 pcfl ccfl power consumption @ 8ma (excluding inverter) - 8.5 11 [watt] (ta=25 j ) note 2 lamp life 50,000 [hrs] ambient temp 20 j ~35 j (with no wind) note 4 note 1: ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd note 2: calculator value for reference (ircflvcflx2=pcfl) note 3: ccfl inverter should be able to give out a power that has a generating capacity of over 1450 voltage. lamp units need 1450 voltage minimum for ignition note 4: ccfl life time 50,000hr at 6.5ma. it?s defined as the brightness of a point of lamp becomes 50% of the initial brightness. it?s recommended not to exceed 6.5 ma for ccfl life time concern and it?s prohibited to exceed 8.5 ma for safety concern.
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 22/28 10.0 vibration,shock,and drop 10.1 vibrati on & shock the module shall work error free after following vibration and shock condition. likewise the module shall not sustain any damage after vibration and shock test. 10.1.1 vibration test spec: frequency: 10 - 200hz sweep: 30 minutes each axis (x, y, z) acceleration: 1.5g(10~200hz p- p) test method: acceleration (g) 1.5 frequency (hz) 10~200~10 active time (min) 30 10.1.2 shock test spec: acceleration (g) 50 active time(ms) 20 wave form half-sin times 1 direction: ? x , ? y, ? z 10.2 drop package test: the drop height is defined as 60 cm. (1 corner,3 edges,6 flat faces) -- no damage and defect found for panel.
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 23/28 11.0 environment the display module will meet the provision of this s pecification during operating condition or after storage or shipment condition specified below. operation at 10% beyond the specified range will not cause physical damage to the unit. 11.1 temperatur e and humidity 11.1.1 operating conditions the display module operates error free, when operated under the following conditions; temperature 0 0 c to 50 0 c relative humidity 20% to 85% wet bulb temperature 39.0 0 c 11.1.2 shipping conditions the display module operates error free, after the following conditions; temperature -20 0 c to 60 0 c relative humidity 5% to 95% wet bulb temperature 39.0 0 c 11.2 atmospheric pressure the display assembly is capable of being operated without affecting its operations over the pressure range as following specified: pressure altitude maximum pressure 1040 hpa 0 m = sea level minimum pressure 601 hpa 3658 m = 12,000 feet note: non-operation altitude limit of this display module = 40,000 feet. = 12193 m. 11.3 thermal shock the display module will not sustain damage after being subjected to 100 cycles of rapid temperature change. a cycle of rapid temperature change consists of varying the temperature from -20 0 c to 60 0 c, and back again. thermal shock cycle -20 0 c for 30min 60 0 c for 30min power is not applied during the test. after temperature cycling, the unit is placed in normal room ambient for at least 4 hours before powering on.
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 24/28 12.0 reliability this display module and the packaging of that will comply following standards. 12.1 failure criteria the display assembly will be considered as failing unit when it no longer meets any of the requirements stated in this specification. only as for maximum white luminance, following criteria is applicable. note: maximum white luminance shall be 75 cd/m 2 or more. 12.2 failure rate the average failure rate of the display module (from first power-on cycle till 1,000 hours later) will not exceed1.0%. the average failure rate of the display module from 1,000 hours until 10,000 hours will not exceed 0.70% per 1000 hours. 12.2.1 usage the assumed usage for the above criteria is: 220 power-on hours per month 500 power on/off cycles per month maximum brightness setting operation to be within office environment (25 0 c typical) 12.2.2 component de-rating all the components used in this device will be checked the load condition to meet the failure rate criteria. 12.3 ccfl life the assumed ccfl life will be typically 50,000 hours under stable conditi on at 25 ? 5 0 c; standard current at 6.5 ? 0.5 ma definition of life: brightness becomes 50% or less than the minimum luminance value of ccfl. 12.4 on/off cycle the display module will be capable of being operated over the following on/off cycles. on/off value cycle +vdd and ccfl power 36,000 10 seconds on / 10 seconds off
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 25/28 13.0 safety 13.1 sharp edge requirements there will be no sharp edges or corners on the display assembly that could cause injury. 13.2 materials 13.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible auo toxicologist. 13.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 14.0 other requirements 14.1 smoke free design any smoke nor strange smell shall not be observed by the operator at any single failure. 14.2 national test lab requirement the display module will satisfy all requirements for compliance to the following requirement: ul 1950, first edition u.s.a. information technology equipment csa c22.2 no.950-m89 canada, information technology equipment iec 950 international, information technology equipment en 60 950 international, information processing equipment (european norm for iec950) the construction of the display module is designed to suppress emi. when mounted into a specified host system, the system will meet the following emi requirement: fcc part 15 class b vcci class 2 cispr 22, class b taiwan cns standard china ccib standard 15.0 label
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 26/28 16.0 mechanical characteristics
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 27/28
(c) copyright au optronics, inc. 2004 all rights reserved. no reproduction and redistribution allowed g150xg01 v.0 28/28

▲Up To Search▲

Price & Availability of G150XG01V0

	To Download G150XG01V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .